Cut down on loss of those expensive safety glasses....
Increase worker acceptance and compliance...
These safety glass retaining cords slip easily over the ends of nearly all styles of glasses.
|
Pyramex Cotton Neck Cords
These safety glass retaining cords slip easily over the ends of nearly all styles of glasses. This neck cord has a very soft cotton feel and can adjust to fit the tension desired around the neck. It is approximately 12 inches long and ½ inch thick.
Cut down on loss of those expensive safety glasses and increase worker acceptance and compliance.
Available only in a Black color.
|
|
Pyramex Lanyard Loop Cords
 The lanyard loop cord is the standard model for the neck cords. It is thin, inexpensive, and can fit almost all safety glasses with an adjustable lanyard loop end. The neck cords are a cheap way to keep your safety glasses close at hand, and safe from dropping or scratching.
Available only in a Black color.
|
|
|
|
Pyramex Clip Cords
 The Pyramex clip cord is a great neck cord, but it will only fit on glasses with little holes drilled into the temples. For glasses that accept the clip cord, it will make the unit more manageable and more securely attached than other models. Has an adjustable slide that fits comfortably around the neck.
Available only in a Black color.
|
|
|
|
Adjustable Neck Cords With Rubber Tips
These safety glass lanyards offers a 1/8 inch round woven polyester neck cord.
They are adjustable so that you can modify the tension around the neck.
The ends that attach to the safety glasses have a 2 inch black rubber tip that adjust to many safety glasses.
|
|
|
|
Black Bungee Adjustable Neck Cord
The cords 9A is a thicker version of the neck cords. It has a round, flexible weave design that is 1/3 of an inch thick.
The cord has a lock-able adjustment ball to make the length comfortable around the neck. The ends are slightly bigger for large temple safety glasses.
Available only in a Black color.
|
|
|
|
Advantage® MAX-4HD - Neoprene Breakaway Neck Cord
The RT cord is the top of the line neck cord. It has a brown and gray Realtree® color design with a break-a-way middle. The cord is approximately 25 inches long from end to end, a bit under ½ inch wide, and has a flat design. The cord attaches to the safety glasses with a lanyard loop end. Because of this, it fits almost all safety glasses, sunglasses, shooting glasses, etc.
|
|
|
|
Black Neoprene Breakaway Neck Cord
The Neo cord is another the top of the line neck cord. The cord is just a little bit less than ½ inch wide, with a nice flat design. The neck cord it an extremely elastic design with a break-a-way middle. It measures approximately 25 inches long from end to end. They attach to the safety glasses with a lanyard loop end. Because of this, it fits almost all safety glasses.
Available only in a Black color.
|
|
|
|
Black Breakaway Neck Cord
The Cords 8A neck cord is a relatively flat, elastic, and stretchy version of the neck cord. It has a break-a-way design in the back, middle of the strap. It is approximately 22 inches long (11 inches when looped around neck), and approximately ¼ inch thick. The ends are flexible to allow for many different types of glasses.
Available only in a Black color.
|
|
|
|
|
|
Pyramex Neoprene Flat Neck Cord
|
|
The NE01 cord is another the top of the line neck cord. The cord is one inch wide, with a nice flat elastic design.
It measures approximately 16.5 inches long from end to end. They attach to the safety glasses with a loop end. Because of this, it fits almost all safety glasses.
Available only in a Black color.
|
|
|
|
|
|
|
Adheres to safety helmet with durable adhesive.
Holds any style eyewear.
Can also be used to hold pencils, ruler or anything that needs access.
Can be imprinted
|
|
|
|
|
|
|
|
|
