T.a.s.c.o.- safety glasses, work gloves, safety products, and industrial safety supplies home page

Lime Class 3 ANSI Vests


Safety Vests - Page 11
 Home ·  Back Supports ·  First Aid ·  Hard Hats ·  Ear Plugs ·  Protective Clothing ·  Respirators ·  Safety Glasses ·  Safety Vests ·  Team Hard Hats ·  Work Gloves ·  More 
 Page 01 ·  Page 02 ·  Page 03 ·  Page 04 ·  Page 05 ·  Page 06 ·  Page 07 ·  Page 08 ·  Page 09 ·  Page 10 ·  Page 11 ·  Page 12 ·  Page 13 ·  Page 14 ·  Page 15 ·  Page 16 
Double Stripe Design - ANSI 2004 Sleeveless Class 2
Lime Safety Vests with Silver Stripes
Double Stripe Design
ANSI 2004 Sleeveless Class 2
Lime with Silver Stripes


Front


Back

The Lime ANSI Class 2 level 2 vests are designed for high traffic areas over 55 mph. The vests are constructed with a soft and flexible polyester material.
These vests come with one pocket on the inside; however, they do not have outside pockets since that may interfere with ANSI class 2 guidelines.

  • 2 vertical stripes and 2 horizontal bands of 2" reflective material.
  • Material can be washed
  • Comes standard with a zipper front but can be ordered for the same costs with a Velcro front enclosure (Minimum order for Velcro front is 12 and allow a 1-2 week lead time)
  • Available with Silver Hi-Gloss 3M stripes, but can be ordered for the same costs with Orange stripes (minimum order is 12 and allow 1-2 week lead time)
  • The Class 2 vests can be imprinted with a company logo and still meet Class 2 Regulations
  • Meets ANSI/ISEA 107-2004 recommendations for Class 2 safety garment.
  • Made in USA
  • Flame Retardant Material   Click here for more information  
  • Note 1
    The Sleeveless Double Verticle Stripe Class 2 vests only meet the new ANSI 2004 Class 2 regulations and is printed this way on the vest label. In order to meet the new ANSI 2004 Class 3 Regulation and have that printed on the label, the vests will need to be made with the sleeves (below).


Mesh Fabric Detail
Standard Fabric Detail
Class Three ANSI 2004 SLEEVED
LIME Safety Vests with Silver Stripes
Class Three ANSI 2004 SLEEVED
LIME Safety Vests with Silver Stripes


Front




Back

The Lime ANSI Class 3 level 2 vests are designed for high traffic areas over 55 mph. The vests are constructed with a soft and flexible polyester material.
These vests come with one pocket on the inside; however, they do not have outside pockets since that may interfere with ANSI class 3 guidelines.

  • 2 vertical stripes and 2 horizontal bands of 2" reflective material.
  • Material can be washed
  • Comes standard with a zipper front but can be ordered for the same costs with a Velcro front enclosure (Minimum order for Velcro front is 12 and allow a 1-2 week lead time)
  • The Class 3 vests can be imprinted with a company logo and still meet Class 3 Regulations
  • Available with Silver Hi-Gloss 3M stripes, but can be ordered for the same costs with Orange stripes (minimum order is 12 and allow 1-2 week lead time)
  • Meets ANSI/ISEA 107-2004 recommendations for Class 3 safety garment
  • Made in USA
  • Flame Retardant Material   Click here for more information  
  • Note 1
    The following vests do not have enough square inches of material to be classified as a Class 3. These vests have the same design with the 2 horizontal bands; however, they will only be classified as a Class 2 on the label.
    • ANSI 2004 Sleeved Size Small

Mesh Fabric Detail
Standard Fabric Detail

Search This Site
Order by item number
Safety Vests Help Center
 Custom Vest Design Fax Form 
 Custom Vest Design Form 
 Custom Vest FAQ 
 Important ANSI Vest Change 
 Pre-Printed Specialty Vest Info. 
 Vest Safety Standards 
 Vest Scrapbook 
 Vest Sizing Info. 
Other Products of Interest
 Caution and Danger Tape 
 Construction Safety Posters 
 Glow-in-the-Dark Hard Hats 
 Hi Viz Hard Hat Covers 
 Hi Viz Work Gloves 
 OSHA Safety Signs 
 

Google Checkout Acceptance Mark


Secure Shopping Cart by:
Americart®