Check out our new line of Hydro Dipped Welding Helmets. Each welding helmet is dipped one at a time and completely unique; therefore, each hood is unique and has slight differences in the placement of the pattern. The final product displays a bright and vivid image with a high gloss finish.
We start with a Pyramex auto darkening welding helmet since this is our best value auto adjusting welding helmet. Since it’s an auto darkening helmet, it reacts to the bright light from the welding process. This hood adjusts from grinding, and then from a shade 9 to a shade 13 with an easy control knob on the left side of the helmet. The welding lens measures 4 inches wide by 2 inches high. Each auto darkening lens offers adjustability for sensitivity and delay to fine tune the shading of the hat.
The shell construction offers a lightweight design and made from a high impact resistant nylon material with an ergonomic design. In addition, the Pyramex auto dark welding helmets have suspensions that are fully adjustable, so you can get the best possible fit. The suspension adjusts to fit the contour of the head; as well as, to adjust the tension to flip up and down the hood.
The high-speed lens operates at 1/30000 seconds, so you get the precision that you need to stay safe and perform your welds correctly. It is powered by solar cells and a replaceable lithium battery. The Auto darkening helmet comes 4 independent arc sensors that are set up in a staggered design to delivery reliable arc detection. Each lens is removed from the shell before dipping and then placed back in the welding helmet then tested prior to shipping.
Show a little of your personal style with your Hydro Dipped Helmet.
Since the welding hoods have been modified from the factory, we can not say they are ANSI approved; however, we are taking a NEW ANSI approved welding hood then adding several layers of paint, ink, and glossy coating to the outside shell.
Since we are placing a flat image on a very rounded surface the back of the welding hood might have a little stretching in the pattern. It more or less looks like a wind swept effect facing towards the back of the helmet.
We are carrying all patterns in stock and can generally produce the hats in 1-2 days; however, there may be an additional 2-4 day lead time in case of back orders or larger orders